Preamp turntable hook up, need to talk to a turntable specialist?
Click here for frequently asked questions.
In this case, the phono level signal must be amplified outside the AV receiver. Need to talk to a turntable specialist?
The opposite using a listening cartridge for DJinghowever, is not recommended. New AV receivers may not have a dedicated set of turntable jacks.
1.0 What Is A Phono Preamp?
Share Share on Facebook. How do I connect a turntable to my receiver? It can ruin your records, your needle, and even your speakers if it gets out of control.
A favorite add-on of audiophiles. The Modular Setup 4.
Order an Orbit, choose a free record! If this sounds like you, then look no further than a streamlined headphone setup.
Any pair of available jacks will work for the connection; just remember which set of jacks is connected to the preamp. What is anti-skate and how do I set it?
Most cartridges are Moving Magnet MM. For example, if the cable from the preamp is connected to the preamps turntable hook up labeled "Tape 1" or "Auxiliary," dial the selector knob on the receiver or press the receiver remote control button for "Tape 1" or "Auxiliary" to activate the connection.
Screen Reader users press enter to Limit by product. Records are recorded to be played at 3 preset speeds: This prevents the low-frequency hum from the turntable cartridge from interfering with the music. From an external preamp: Instead, AV receivers accept the line-level signal from CD players and amplifiers, which does not require equalization or a significant power boost.
Answers others found helpful
Our stereo receiver recommendations: An active speaker is self-powered and does not require an additional amplifier or stereo system. If your turntable does not have a built-in preamp: Connect the white and red plugs on each end of a stereo cable from the left and right audio output jacks on the turntable to the left and right audio input jacks on the back of the preamp.
Setting up your turntable is simple, but there are many ways to do it.
If not, you will need a phono preamp — available either as a standalone component or built-in to the turntable itself this option is available on all Orbit models.